Main page » Products » Liquid Filtration Systems » Cartridge Filter Housings » POLYLINE Multi
Multiple Cartridge Filter Housings
POLYLINE multiple cartridge housings are heavy-duty filter housings made of glass-reinforced polypropylene. These housings are made in one piece without any welds. All inserts are also molded in one piece, free of welds.
The housing can fit five filter cartridges of 30" length. Cartridges to be used can be DOE (double open end) or SOE 222 (with double O-ring).
The cover is screwed onto the housing sealed with an FPM O-ring. The cover features a vent as standard.
The housing is equipped with an inlet (N1) and two outlets (N2) for in-line or loop piping connections. The unused outlet can either be plugged or can be used as a drain.
The filter housing is supplied with either 2" BSP female connections or 2" ANSI/DIN flanges.
The filter housing has a self-supporting integral bottom mounting flange. It can be bolted in the floor for additional security. No additional leg assembly is needed.
| POLYLINE Type | PCF-530-P-10 | PCF-530-P-10-F |
|---|---|---|
| Max. Operating Conditions (bar/°C) | 10/20 (see graph) | 10/20 (see graph) |
| Material | glass-reinforced Polypropylene | |
| Housing Dimensions (mm) A B C | 1221 933 165 | 1221 933 165 |
| Volume (l) | 36 | 36 |
| Vent | 5/8" NPT | 5/8" NPT |
| Length of Filter Cartridge | 30" (762 mm) | 30" (762 mm) |
| No. of Filter Cartridges | 5 | 5 |
| Weight (kg) | 30 | 32 |
| Inlet/Outlet | 2" BSP female thread | 2" ANSI/DIN flange |
 |
© 2007 Tomášová Lea, s.r.o. - Industrial equipment | Phone: +420 466 650 876 | E-mail: office@tomasovalea.cz
